News:

THE FOLLOWING IS ONLY FOR YOUR ALIENWARE WARTIME

THE BELOW SETTINGS ARE FOR YOUR ALIENWARE WARTIME EDITION DESKTOP PC, THAT HAS THE CORE I7/X58 MOBO AND DDR3 TRIPLE CHANNEL MEMORY INSTALLED;

*AND NOT FOR ANY OTHER CONFIGURATION!*

OTHER DESKTOP PC'S WILL VARY IN THESE SETTINGS AND SO THESE SETTINGS DO NOT APPLY TO ANY OTHER TYPE PC OTHER THAN STATED ABOVE..., *THIS IS A WARNING BEFORE-HAND*

*MENTAL NOTE*

  THE ARTICLE THAT FOLLOWS IS IN DEPTH AND AS INFORMATIVE AS I COULD POSSIBLY MAKE IT, AND IT IS EDITED AS TYPED, FROM PERSONALLY ACQUIRED KNOWLEDGE FROM MY OWN TRIALS AND ERRORS MOSTLY, BUT ALSO MY ACQUIRED KNOWLEDGE FROM VARIOUS MEDIA SOURCES COLLECTED FROM THE INTERNET. AND AS TYPED I EDITED AND ENHANCED IT AS MUCH AS I COULD POSSIBLY ACCOMPLISH (TO THE BEST OF MY ABILITIES, TO ACCOMMODATE THE MAJORITY OF PC SKILL LEVELS...


  ...(NOT JUST BEGINNER, NOT JUST NOVICE, NOT JUST ADVANCED, NOT JUST PRO, AND CERTAINLY NOT JUST ELITE SKILL LEVELS)..

  I WISH THAT I COULD WRITE MANY ARTICLES FOR MANY SKILL LEVELS,
(HOWEVER, LIFE IS TOO SHORT FOLKS), SO MY ARTICLE IS EDITED AS I TYPED IT FROM PERSONALLY ACQUIRED KNOWLEDGE, REVISED, AND ENHANCED TO THE BEST OF MY ABILITIES FOR EVERYONE POSSIBLE, AS A WHOLE.

THANK YOU FOR BEARING THAT IN MIND AND PROCEEDING FURTHER, (IF YOU SO CHOOSE TO)...

  I APPRECIATE YOUR TIME AND PATIENCE, AND AS A REWARD FOR YOUR TIME SPENT READING MY ARTICLE, I CAN SAY THAT I HAVE TRIED TO THE VERY BEST OF MY ABILITIES TO BE AS CONCISE, INFORMATIVE AND COMPLETE AS I POSSIBLY CAN WITH THE FOLLOWING CUSTOM, SELF ACQUIRED KNOWLEDGE, TIME AND EFFORTS THAT IT TOOK TO PUT THE FOLLOWING ARTICLE TOGETHER.

                                         STANDP~"AVID PC ENTHUSIAST SINCE 1982..."

                                                                +-=8^)~(^8=-+

                                                          ~<(___)~CHEERZZZ...!

                                                                       ATA+++

                                                           YOU ARE CONNECTED!

Step 1 TURN ON PC...

(POWER UP YOUR WARTIME EDITION PC)

Tips

*IT IS DUE-LY NOTED THAT ALIEN WARE CASES, COVERINGS,

INTERNALS AS WELL AS CABLE COVERINGS ARE ALL MADE OF

MATERIALS THAT DISCHARGE STATIC PARTICLES*

 >> SURE, BUT...>>

BE EXTRA PROTECTED AND GET A THICK NON-SLIP, POROUS SURFACED ANTI-STATIC MAT PAD TO GO UNDER YOUR PC CHAIRS, SO AS TO PREVENT ANY STATIC CHARGES FROM OCCURRING...

(MOST OF THESE PAD'S ARE SEE THROUGH *SO THAT YOU CAN SEE ANY DEBRIS UNDER THEM IF IT HAPPENS TO GET UNDER, AS WELL AS ANY DEBRIS ON THE MAT'S SURFACE. THEY ALSO HAVE NUMEROUS SHARP DIMPLES ON THE UNDER-SIDE THAT GRIP ONTO YOUR CARPET TO PREVENT THE MAT PAD FROM MOVING AROUND UNDER PRESSURE, SO THE MORE PRESSURE THE MORE THE SHARP DIMPLES GRIP INTO THE CARPET AND PREVENT ANY SLIPPAGE THAT COULD POSSIBLY CREATE A STATIC CHARGE... THE PRICES VARY IN RANGE AND WE HAD TO GO OUT OF TOWN TO A LOCAL OFFICE SUPPLY STORE TO GET OURS. SO THAT BEING DONE, YOU CAN SAFELY DISCHARGE STATIC EVEN FURTHER BY FIRST TOUCHING THE DESKTOP PC CASE, BEFORE OPENING IT TO WORK ON IT, ONLY IF YOU HAVE PREVIOUS EXPERIENCE, OTHERWISE DON'T.

Step 2 PRESS DEL KEY TO ENTER YOUR BIOS...

Step 3 FROM MAIN ARROW OVER TO "Ai Overclock Tuner" AND SET IT TO:

[D.O.C.P.]

NOTE* IT'S DESIGNED TO OVERCLOCK DRAM FREQUENCY BY ADJUSTING BCLK FREQUENCY. *

Step 4 NOW GO DOWN TO DRAM O.C. Profile and set it to:

[DDR3-1805MHz] (IF NOT ALREADY SET...)

Step 5 THEN DOWN TO CPU RATIO SETTING AND KEY IN:

[20.0]

Step 6 THEN DOWN TO Intel (R) SpeedStep (TM) Tech AND SET IT TO:

[ENABLED].

Step 7 THEN DOWN TO BCLK FREQUENCY AND SET IT AT:

[153] *THIS SETS CPU OVERCLOCKING SPEED TO 3.05GHZ (SAFE O.C. SPEED)

Step 8 THEN DOWN TO PCIE FREQUENCY AND KEY IN (IF NOT ALREADY)

[100]

Step 9 THEN DOWN TO DRAM FREQUENCY AND SET IT TO:

[DDR3-1841MHz] (IF NOT ALREADY SET...)

Step 10 UCLK FREQUENCY & QPI LINK DATA RATE *LEAVE BOTH ON:

[Auto]

Step 11 THEN LASTLY, DOWN TO DRAM BUS VOLTAGE AND KEY IN:

[1.56]

Step 12 THAT'S IT, NOW SAVE & EXIT...

*WARNING* MAKE SURE TO SET YOUR VOLTAGE AS STATED OR...   

  YOU MAY DO PERMANENT DAMAGE (AS WARNED) TO THE MOBO OR PROCESSOR...

  BUT REMEMBER *NEVER* SET TO WILD EXTREMES, OR YOU WILL IN THE FUTURE GET BLUE-SCREEN ERRORS (ESPECIALLY WHEN USING SUCH APPS AS VMWARE) OUT OF MY OWN EXPERIENCE, KEEP THE SETTINGS LOW AS STATED ABOVE SO THAT YOU DO NOT SPORADICALLY OR EVEN CONTINUALLY GET (BSOD'S!) YOU CAN EASILY & SAFELY OVERCLOCK THE CPU FROM 2.67GHz TO 3.05GHz SAFELY AND EFFECTIVELY BY FOLLOWING WHAT I AM SAYING HERE. IF YOU DECIDE TO NOT ABIDE BY THE INFO AS STATED HERE BE FULLY WARNED, YOU MAY RUIN OR IN THE LEAST GET MAJOR BLUE-SCREEN ERRORS...

  ALSO, I AM SUGGESTING AND NOT TELLING YOU TO EVEN TRY THIS SO THIS IS TOTALLY UP TO YOU, AS A DISCLAIMER, I AM NOT RESPONSIBLE FOR ANYTHING THAT MAY GO WRONG HERE; I CAN ONLY SAY MY ALIENWARE WARTIME EDITION CORE I7/ X58 W/ INTEL 920 NAHALEM CPU & DDR3 TRIPLE CHANNEL MEMORY WORKS WITH THE ABOVE SETTINGS...

                                STANDP~"AVID PC ENTHUSIAST SINCE 1982..."

Be the First to Comment

Share Your Thoughts

  • Hot
  • Latest